Measured, made and fitted

Fitted wardrobes in Altea

We can assist you inEspañolEnglishDeutschРусский

Fitted wardrobes in Altea. Width, height, depth, walls and floor are checked at several points. Interiors and fillers are adapted to those differences.

Plan my project → WhatsApp

The spaceA front-facing photo
DimensionsWidth, height, depth
StorageWhat it needs to hold

Designed for your space

Fitted means more than filling a recess

Depth, wall lean, ventilation, skirting and ceiling level change both the internal storage and the finished elevation. The proposal continues to prioritise a composed appearance, practical storage and fitting details resolved before manufacture.

Designed for the space

Dimensions and layout are checked against the room and your priorities.

Choices explained

We compare suitable materials and hardware before the specification is approved.

Scope in writing

The quotation identifies the furniture, fitting and any optional or separate work.

One project contact

Your contact coordinates questions about the proposal and the next steps.

Guillermo RivasYour contact in Altea

Your project starts here

Bring your inspiration into your own space.

I'm Guillermo Rivas. An inspiration image is a useful start, but your room has its own proportions. Share it with me and we'll explore which ideas could fit and which need adapting.

No obligation. Rough measurements are enough to get started.

Share my idea Chat on WhatsApp

Use before catalogue

The difficult part is what the recess does not reveal

Two recesses with the same width can require different construction. We measure geometry, available depth and junctions before promising capacity. In Altea, it is tested against stepped access, irregular masonry, strong light and routes that may limit module size.

Wall lean and squareness

Instead of assuming a standard answer, we take widths, heights and diagonals at several points in the opening. The intended result can be stated plainly: trims and allowances absorb irregularity without twisting the elevation.

Available depth

This is not about adding more modules. We deduct the back, doors, tracks and walls that are out of plumb. Usefulness is tested in one way: the nominal dimension becomes verified internal depth.

Access panels and ventilation

We locate grilles, boxes, valves and points that must remain accessible as part of the drawing rather than at the end. The practical consequence: the wardrobe does not hide essential maintenance or create a damp enclosure.

Perimeter junctions

The decision starts with day-to-day use: we coordinate ceiling, floor, sides, mouldings and skirting with the elevation. The intended result is this: the finished wardrobe reads as part of the surrounding area.

Applied decisions

Three recesses that need different construction

Integration follows the measured geometry and access route. An ideal module grid does not correct a real wall. The scenarios are adjusted for old-town houses, apartments, villas and hillside properties.

Custom fitted wardrobes for deep recess in Altea

Scenario 01 · Altea Pueblo

Everyday storage without losing boxes at the back

We bring frequent items forward and reserve extra depth for reachable storage during design. The detail is resolved when the result is clear: the recess volume is used without creating blind corners. For a property around Sierra de Altea, access and handling are reviewed before component sizes are fixed.

Starting point: We begin with one practical check: we assess depth at both sides and the bedroom door position. It produces a specific result: the storage plan knows its actual limit. The proposal must continue to prioritise a composed appearance, practical storage and fitting details resolved before manufacture.
Decision: Instead of assuming a standard answer, we combine front hanging with shelves or luggage storage that do not require emptying the wardrobe. The intended result can be stated plainly: less frequent items remain retrievable.
Before manufacture: We agree the back, ventilation and access to any existing service point. The enclosure does not compromise the wall or its maintenance.

Custom fitted wardrobes for full wall in Altea

Scenario 02 · Casco Antiguo

A fitted elevation where no wardrobe existed

We create modules and wall-to-wall trims without pretending the bedroom is perfectly square rather than transferring a standard composition. On that basis, the project has a specific outcome: the elevation remains regular even when the building is not. The approach is adapted to old-town houses, apartments, villas and hillside properties, without turning location into a preset style.

Starting point: Before this part is approved, we measure skirting, sockets, mouldings, ceiling and side junctions. The objective is clear: each interference enters the drawing.
Decision: This point is explained before pricing: we divide the wardrobe into buildable modules and proportion the trims. The later check confirms the essential result: the tolerances do not look like added patches. The proposal must continue to prioritise a composed appearance, practical storage and fitting details resolved before manufacture.
Before manufacture: Sequence matters. First, we agree what remains, moves or sits outside the included work. The second condition: the project estimate and the work describe the same result.

Custom fitted wardrobes for side pier in Altea

Scenario 03 · Altea la Vella

One calm elevation with two internal depths

We assign uses and modules to the deeper and shallower zones. The decision is recorded. The final reference: the pier no longer turns one end into wasted space. For a property around Altea Pueblo, access and handling are reviewed before component sizes are fixed.

Starting point: We survey the depth change and its relation to the doors. One condition still applies: the opening does not clash with the transition.
Decision: We place hanging and drawers in the full depth and shelves in the reduced zone. The decision is recorded. The final reference: each interior receives a compatible use.
Before manufacture: With the recess verified, we detail fixings, trim and adjustment allowance beside the pier. Approval depends on one clear result: fitting maintains a continuous front line. The proposal must continue to prioritise a composed appearance, practical storage and fitting details resolved before manufacture.

Configuration gallery

Examples of fitted wardrobes

Sixteen configurations showing different layouts, finishes and ways to integrate the furniture into a real room.

Fitted wardrobes in Altea: wall-to-wall white fronts — 01
**Wall-to-wall white fronts**A built-in wardrobe with plain doors and long handles beside a traditional balcony

Fitted wardrobes in Altea: natural oak fitted to the full recess — 02
**Natural oak fitted to the full recess**Continuous grain and a precise top scribe integrate storage into the bedroom

Fitted wardrobes in Altea: walnut with smoked glass — 03
**Walnut with smoked glass**A softly lit display bay paired with full-depth closed storage

Fitted wardrobes in Altea: green lacquer with an open niche — 04
**Green lacquer with an open niche**A fitted composition alternating tall doors with a central oak bookcase

Fitted wardrobes in Altea: built-in wardrobe beside the balcony — 05
**Built-in wardrobe beside the balcony**Warm full-height fronts with side fillers tailored to an urban Spanish home

Fitted wardrobes in Altea: fitted storage beneath a sloping roof — 06
**Fitted storage beneath a sloping roof**Made-to-measure doors follow the pitch while retaining useful capacity

Fitted wardrobes in Altea: illuminated niche overlooking the coast — 07
**Illuminated niche overlooking the coast**Pale oak drawers and open shelving sit between full-height closed modules

Fitted wardrobes in Altea: designed around an existing column — 08
**Designed around an existing column**Olive lacquer and a central recess resolve an irregular wall without disguising it

Fitted wardrobes in Altea: shallow storage for a corridor — 09
**Shallow storage for a corridor**A reduced-depth built-in wardrobe keeps the passage clear while using the available wall

Fitted wardrobes in Altea: classic doors for an older property — 10
**Classic doors for an older property**Framed fronts, a scribed cornice and a light finish complement the original floor

Fitted wardrobes in Altea: smoked glass with internal lighting — 11
**Smoked glass with internal lighting**A premium walnut scheme reveals hanging rails, shelves and drawers through the glass

Fitted wardrobes in Altea: integrated storage for a child's room — 12
**Integrated storage for a child's room**Sage modules include an accessible bookcase and low drawers for everyday use

Fitted wardrobes in Altea: storage bridge above the bed — 13
**Storage bridge above the bed**Top cupboards, side wardrobes and oak bedside niches form one fitted composition

Fitted wardrobes in Altea: entrance wardrobe with a bench — 14
**Entrance wardrobe with a bench**Blue-grey fronts conceal coats and shoes around an open oak seating niche

Fitted wardrobes in Altea: premium continuous walnut — 15
**Premium continuous walnut**Selected natural veneer and slim brass pulls create a complete bedroom storage wall

Fitted wardrobes in Altea: a home office concealed within storage — 16
**A home office concealed within storage**An oak desk and work shelves are integrated between closed wardrobe modules

Instagram

A closer look at our studio

Six types of recess and how the solution changes

The carcass, doors, trims and fitting order depend on the perimeter we actually find. The actual property in Altea completes the choice.

Configuration	Usually solves	Critical check
Under a slope	Primary role: Stepped modules	Must be recorded: Usable height and each door swing
With a pier	The option is assessed for: Different internal depths	Critical point: Transition and access to the shallow zone
Bridge unit	Frequent application: Side cabinets and overhead storage	Advance check: Fixing, headroom and weight
Existing recess	Frequent application: Interior and elevation between walls	Check before deciding: Diagonals, depth and ventilation
Full wall	Most frequent use: Modules from side to side	Do not close the design without reviewing: Trims, skirting and side sockets
Floor to ceiling	The option is assessed for: Daily storage plus top cupboards	Verified during the survey: Transportable panels and lifting allowance

Written scope

What the fitted wardrobe project includes

The project documentation defines the internal storage and how it meets the walls, ceiling and floor.

Recess review

We collect photographs, intended use, initial dimensions and elements that must remain rather than transferring a standard composition. On that basis, the project has a specific outcome: the first feasibility review starts with the complete perimeter.

Geometry survey

We measure widths at different heights, diagonals, depths, wall lean and skirting. The component plan includes real tolerances. In Altea, this decision is also checked against stepped access, irregular masonry, strong light and routes that may limit module size.

Internal design

With the recess verified, we adapt hanging, shelves, drawers and top storage to usable depth. Approval depends on one clear result: external integration does not reduce internal function.

Doors and trims

This point is explained before pricing: we resolve opening, profiles, handles, plinth, sides and ceiling line. The later check confirms the essential result: all finishing details are approved with the elevation.

Manufacturing plan

A nominal dimension is not enough here. We fix tolerances, panel divisions, supports and installation sequence. After the review, components respond to the recess and route in.

Fitting and adjustment

To settle this decision without improvising on site, we protect, assemble, finish and check doors and access. The result can then be checked: the recess is completed and adjusted in the site.

Building work, damp repair, decoration or moving services are priced separately when the recess requires them. Any additional work identified in Altea is added only after it has been explained and priced.

Before the workshop

The recess is verified before manufacture is committed

One nominal dimension is not enough. Date and budget follow the geometry, interior, elevation, trims and access. In Altea, we also confirm stepped access, irregular masonry, strong light and routes that may limit module size.

How the order moves forward

01
Initial feasibility
We review photographs, rough dimensions and what the wardrobe project needs to achieve, then explain what information is missing.
02
Measured design
The room, opening, access and door movement are checked before the arrangement and elevation are approved.
03
Accepted scope
Drawings, finishes, hardware, scope and written price proposal are accepted before the workshop slot is booked.
04
Coordinated handover
Delivery, protection, installation, adjustment and final review are coordinated in Altea. The actual property conditions in Altea take priority over a catalogue solution.

Factors included in the assessment

Recess geometry

Each irregularity is resolved before workshop production. That is why we study wall lean, slopes, piers, depth changes and the number of trims.

Internal construction

The decision starts with day-to-day use: we detail carcasses, backs, divisions, drawers and accessories. The intended result is this: quoted capacity matches the approved layout.

Door system

First, we assess side by side sliding, hinged, tall panels, mirror and hardware. After that, weight and movement remain compatible with the opening.

Preparation and fitting

A nominal dimension is not enough here. We include access, protection, agreed removal, fixings and adjustment. After the review, installation does not depend on implied items. In Altea, this decision is also checked against stepped access, irregular masonry, strong light and routes that may limit module size.

Surveying the area · Altea

Conditions worth recording in Altea

Projects may involve old-town houses, apartments, villas and hillside properties. We do not assign one solution to an area: the construction, use and fitting route of each property are checked.

L’Olla and Altea Pueblo: reading the property

For custom fitted wardrobes, broad photographs and one rough dimension usually reveal what needs checking during the survey. The brief remains tied to the actual room.

Access and component sizes around Casco Antiguo

Stepped access, irregular masonry, strong light and routes that may limit module size can change panel sizes, the delivery order and fitting time. We record those facts before manufacture.

Everyday use from Altea la Vella to Mascarat

The recommendation continues to prioritise a composed appearance, practical storage and fitting details resolved before manufacture. Materials and accessories are compared by care and usefulness, not by a presumed local style.

Before you instruct us

No anonymous promises or implied scope

We publish how to contact us and when the team is available. Project-specific conditions in Altea are recorded before manufacture.

Languages

We work in Spanish, English, German and Russian, by WhatsApp, e-mail or at the Altea office by appointment.

Project contact

MMV Studio routes the request through a project manager who keeps the site survey, design, workshop and installation connected.

Website details

Trading name: MMV Studio · mueblesamedidaaltea.es · proyectos@mueblesmedidavalencia.es. Full legal details are linked from the legal notice.

When the team is available

Enquiries are handled Monday to Friday, 09:00–13:00 and 14:00–20:00; Saturday, 10:00–13:30 and 16:00–19:30.

Guarantee terms

Applicable coverage, duration, supplied components, fitting, care and exclusions appear in the accepted documents.

Read the legal notice → See all published reviews →

Guillermo RivasYour contact in Altea

The next step

Let's turn the options into your project.

Attach your reference image and a photo of the actual room. I'll help you identify the adaptations worth considering before defining the design.

Scope and terms are confirmed before you place an order.

Request a proposal Ask a question

Before requesting a quotation

Questions about custom fitted wardrobes in Altea

Does the old interior need removing?＋

This depends on its condition and the new design. Removal, retention and alterations are identified in the scope before manufacture.

What do I need for an initial enquiry?＋

Send photographs, approximate dimensions and what you want the furniture to do. We will identify any details needed before a measured survey or quotation.

What is confirmed before manufacture?＋

The design, dimensions, materials, hardware, price and installation scope need to be agreed. Changes are reviewed before they are put into production.