Measured, made and fitted

Hinged-door wardrobes in Altea

We can assist you inEspañolEnglishDeutschРусский

Hinged-door wardrobes in Altea. Each door swing is checked against the bed, bedside tables and room doors. Hinges must allow access to internal drawers.

Plan my project → WhatsApp

The spaceA front-facing photo
DimensionsWidth, height, depth
StorageWhat it needs to hold

Designed for your space

Full access where the bedroom allows the doors to swing

A hinged door reveals the whole module, but its width and swing must work with the bed, bedside tables, sockets and circulation. The proposal continues to prioritise a composed appearance, practical storage and fitting details resolved before manufacture.

Designed for the space

Dimensions and layout are checked against the room and your priorities.

Choices explained

We compare suitable materials and hardware before the specification is approved.

Scope in writing

The quotation identifies the furniture, fitting and any optional or separate work.

One project contact

Your contact coordinates questions about the proposal and the next steps.

Guillermo RivasYour contact in Altea

Your project starts here

Bring your inspiration into your own space.

I'm Guillermo Rivas. An inspiration image is a useful start, but your room has its own proportions. Share it with me and we'll explore which ideas could fit and which need adapting.

No obligation. Rough measurements are enough to get started.

Share my idea Chat on WhatsApp

Designed from the inside

Each door should correspond with the interior it opens

More doors do not guarantee better access. We specify width, hinges, handles and modules so the elevation remains proportionate and practical. In Altea, it is tested against stepped access, irregular masonry, strong light and routes that may limit module size.

Swing clearance

A catalogue does not decide this point. We draw every door open against the bed, bedside table, wall and entrance door. The important result is simple: the user can stand in front without becoming trapped.

Proportionate door width

This is not about adding more modules. We relate door count to modules, height and elevation rhythm. Usefulness is tested in one way: the doors do not become heavy or fragment the elevation without reason.

Sized hinges

We select hinge quantity and type according to height, weight and opening as part of the drawing rather than at the end. The practical consequence: each door retains alignment and adjustment through use.

Fully visible interior

First, we align the door, division and pull-out accessories. After that, drawers, rails and baskets remain accessible without overlap.

Planning scenarios

Three bedrooms where door swing changes the design

A hinged door works well when the elevation, interior and space in front have been drawn together. The scenarios are adjusted for old-town houses, apartments, villas and hillside properties.

Custom hinged-door wardrobes for shared wardrobe in Altea

Scenario 01 · Mascarat

Six doors giving full view of each module

Before this part is approved, we divide the elevation around personal interiors and one shared zone. The objective is clear: each person opens their module without moving another door. In Altea, this decision is also checked against stepped access, irregular masonry, strong light and routes that may limit module size.

Starting point: Instead of assuming a standard answer, we confirm the distance to the bed and both bedside tables. The intended result can be stated plainly: every door has a clear swing. The actual property conditions in Altea take priority over a catalogue solution.
Decision: We assign one or two doors to each group of rails, drawers and shelves. One condition still applies: the elevation explains the internal organisation.
Before manufacture: This point is explained before pricing: we test handles, simultaneous opening and access to lower drawers. The later check confirms the essential result: two users can use the wardrobe without conflict.

Custom hinged-door wardrobes for end beside a wall in Altea

Scenario 02 · Sierra de Altea

A final door that opens without striking the wall

The proposal becomes more coherent when we allow separation, an opening restriction or a proportionate trim. The requirement remains unchanged: the handle and edge do not mark the perpendicular wall. In Altea, this decision is also checked against stepped access, irregular masonry, strong light and routes that may limit module size.

Starting point: The proposal becomes more coherent when we measure the side wall, skirting, switch and handle projection. The requirement remains unchanged: the conflict is known before component planning.
Decision: This is not about adding more modules. We adjust the trim, hinge and maximum angle of the end door. Usefulness is tested in one way: the module retains a comfortable opening. For a property around Mascarat, access and handling are reviewed before component sizes are fixed.
Before manufacture: The decision starts with day-to-day use: we check drawers and accessories against the available angle. The intended result is this: the swing restriction does not create another internal obstruction.

Custom hinged-door wardrobes for tall door in Altea

Scenario 03 · Cap Negret

Continuous panels with correctly specified hinges

To settle this decision without improvising on site, we calculate weight, stiffness, hinges and adjustment points. The result can then be checked: the vertical composition does not lose stability. The approach is adapted to old-town houses, apartments, villas and hillside properties, without turning location into a preset style.

Starting point: The panel can swing without rubbing. That is why we measure height, level variation and allowance between door, floor and ceiling.
Decision: From the first proposal, we choose substrate, thickness and hinge quantity for the intended finish. The expected outcome: weight and deflection remain controlled.
Before manufacture: We begin with one practical check: we confirm transport and space for offering up the door during fitting. It produces a specific result: the component arrives, hangs and adjusts safely. The actual property conditions in Altea take priority over a catalogue solution.

Configuration gallery

Examples of hinged-door wardrobes

Sixteen configurations showing different layouts, finishes and ways to integrate the furniture into a real room.

Hinged-door wardrobes in Altea: white custom wardrobe with hinged doors — 01
**White custom wardrobe with hinged doors**Smooth floor-to-ceiling fronts sit neatly within a bedroom in Altea with original patterned tiles

Hinged-door wardrobes in Altea: full-wall walnut hinged wardrobe — 02
**Full-wall walnut hinged wardrobe**Tall doors and slim black handles form a warm composition beside the balcony

Hinged-door wardrobes in Altea: olive-green hinged wardrobe in an alcove — 03
**Olive-green hinged wardrobe in an alcove**Three pairs of doors use a contained wall without narrowing the route around the bed

Hinged-door wardrobes in Altea: light-oak custom hinged wardrobe — 04
**Light-oak custom hinged wardrobe**Careful side and ceiling fillers complete a clean installation in a bedroom with exposed beams

Hinged-door wardrobes in Altea: classic hinged wardrobe with fitted interior — 05
**Classic hinged wardrobe with fitted interior**An open door reveals a rail, shelves and drawers behind warm-white fronts and brass handles

Hinged-door wardrobes in Altea: compact custom wardrobe for a small bedroom — 06
**Compact custom wardrobe for a small bedroom**Two hanging rails, an upper shelf and drawers organise daily clothing in a narrow module

Hinged-door wardrobes in Altea: hinged wardrobe fitted around a structural column — 07
**Hinged wardrobe fitted around a structural column**Different-width modules absorb the projection while keeping every storage section accessible

Hinged-door wardrobes in Altea: l-shaped custom hinged wardrobe — 08
**L-shaped custom hinged wardrobe**The layout turns across two walls with compatible door swings and useful corner storage

Hinged-door wardrobes in Altea: hinged wardrobe beneath a sloping roof — 09
**Hinged wardrobe beneath a sloping roof**Stepped doors, shelving and a rail follow the pitch to recover storage within the eaves

Hinged-door wardrobes in Altea: bridge wardrobes around the bed — 10
**Bridge wardrobes around the bed**Side towers and overhead cupboards free floor space while retaining straightforward hinged access

Hinged-door wardrobes in Altea: hinged hall wardrobe with shoe storage — 11
**Hinged hall wardrobe with shoe storage**Coats, shoes and bags share a full-height cupboard, bench and ventilated drawers

Hinged-door wardrobes in Altea: oak wardrobe with woven-cane hinged fronts — 12
**Oak wardrobe with woven-cane hinged fronts**Natural fibre ventilates the interior and adds texture to a warm coastal-home scheme

Hinged-door wardrobes in Altea: custom wardrobe with a concealed office — 13
**Custom wardrobe with a concealed office**Two hinged doors hide the desk, sockets, task lighting and shelves after the working day

Hinged-door wardrobes in Altea: premium illuminated walnut wardrobe — 14
**Premium illuminated walnut wardrobe**Two open compartments reveal hanging rails, drawer units and warm lighting behind matched veneer fronts

Hinged-door wardrobes in Altea: adaptable hinged wardrobe for a teenager — 15
**Adaptable hinged wardrobe for a teenager**Adjustable shelves, a rail, drawers and a side bookcase let the storage change over time

Hinged-door wardrobes in Altea: shallow hinged utility wardrobe — 16
**Shallow hinged utility wardrobe**One door opens onto household linen, cleaning storage and an ironing-board slot in a narrow corridor

Instagram

A closer look at our studio

How a hinged wardrobe elevation changes

Width, height, handle and hinge produce different demands. The internal storage sets the most useful rhythm. The actual property in Altea completes the choice.

Configuration	Usually solves	Critical check
Two wide doors	Typical context: Short wardrobe with broad access	The survey must confirm: Weight and swing space
Four or six doors	The option is assessed for: Long wall with clear modules	Verified during the survey: Rhythm, junctions and simultaneous opening
Full-height door	Usually considered for: Continuous vertical elevation	The survey must confirm: Stiffness, hinges and floor clearance
Separate top cupboard	Most frequent use: Daily storage below, seasonal above	Critical point: Horizontal line and access
Applied handle	Need addressed: Direct opening and visible detail	A fact that changes the system: Projection, impact and ergonomics
Finger pull or push	Primary role: Quieter elevation	Advance check: Grip, fingerprints and adjustment

Written scope

What the hinged wardrobe project includes

The project documentation shows the elevation closed and open, allowing swing, access and layout to be approved before workshop production.

Room survey

Sequence matters. First, we survey the wardrobe, bed, bedside tables, doors, windows, sockets and route. The second condition: each door swing starts from the complete room.

Elevation design

From the first proposal, we detail quantity, width, height, joints, handles and horizontal lines. The expected outcome: the elevation responds to the interior and wall proportion. The actual property conditions in Altea take priority over a catalogue solution.

Coordinated interior

Instead of assuming a standard answer, we align modules, rails, drawers and accessories with each opening. The intended result can be stated plainly: all contents are reached through the corresponding door.

Hinges and opening

We specify load, hinge quantity, closing, restriction and adjustment by considering use and geometry together. Acceptance is based on this result: the intended movement is documented.

Manufacture and finishes

We close substrate, thickness, lacquer, veneer, board, mirror and edges by considering use and geometry together. Acceptance is based on this result: the door retains flatness and durability.

Fitting and alignment

The elevation is handed over level and functional. That is why we hang, adjust gaps, check closing and review rubbing points.

Moving switches, correcting walls, decoration or removing the old wardrobe are separate items when applicable. Any additional work identified in Altea is added only after it has been explained and priced.

A verifiable plan

Door swing is validated before the workshop slot

Door count, height, finish, hinges, interior and fitting space change cost and programme. In Altea, we also confirm stepped access, irregular masonry, strong light and routes that may limit module size.

How the order moves forward

01
Initial feasibility
We review photographs, rough dimensions and what the wardrobe project needs to achieve, then explain what information is missing.
02
Measured design
The surrounding area, opening, access and door movement are checked before the internal plan and elevation are approved.
03
Accepted scope
Drawings, finishes, hardware, agreed scope and quotation are accepted before production is booked.
04
Coordinated handover
Delivery, protection, installation, adjustment and final review are coordinated in Altea. For a property around L’Olla, access and handling are reviewed before component sizes are fixed.

Where the investment changes

Quantity and format

We study wide doors, higher door counts, top cupboards and continuous panels rather than transferring a standard composition. On that basis, the project has a specific outcome: the selected composition reflects its actual work.

Hinges and closing

During design, we size hinges, soft closing, push catches, restrictors and accessories. The drawing can progress once this result is clear: each mechanism relates to weight and frequency.

Finish and handles

The proposal becomes more coherent when we review in parallel board, lacquer, veneer, mirror, finger pulls and applied handles. The requirement remains unchanged: preparation, edging and machining appear in the commission detail.

Interior and fitting

The solution is tested in two stages. First, we include carcasses, equipment, access, hanging, adjustment and review. Then, the elevation is assessed as part of the complete wardrobe. The actual property conditions in Altea take priority over a catalogue solution.

Property and access · Altea

Location gives context; the opening makes the decision

Projects may involve old-town houses, apartments, villas and hillside properties. We do not assign one solution to an area: the construction, use and fitting route of each property are checked.

L’Olla and Altea Pueblo: reading the property

For custom hinged-door wardrobes, broad photographs and one rough dimension usually reveal what needs checking during the survey. The brief remains tied to the actual room.

Access and component sizes around Casco Antiguo

Stepped access, irregular masonry, strong light and routes that may limit module size can change panel sizes, the delivery order and fitting time. We record those facts before manufacture.

Everyday use from Altea la Vella to Mascarat

The recommendation continues to prioritise a composed appearance, practical storage and fitting details resolved before manufacture. Materials and accessories are compared by care and usefulness, not by a presumed local style.

Details you can verify

Identifiable contact and written project conditions

We publish how to contact us and when the team is available. Project-specific conditions in Altea are recorded before the order reaches the workshop.

Published contact

MMV Studio publishes proyectos@mueblesmedidavalencia.es and a link to the applicable legal information on mueblesamedidaaltea.es.

Enquiry hours

Enquiries are handled Monday to Friday, 09:00–13:00 and 14:00–20:00; Saturday, 10:00–13:30 and 16:00–19:30.

Documented coverage

Coverage, duration, supplied elements, fitting conditions, maintenance and exclusions are set out in writing before the order reaches the workshop.

Languages

We work in Spanish, English, German and Russian, by WhatsApp, e-mail or at the Altea office by appointment.

Project management

The project team remains the point of contact: it organises the brief first, then coordinates technical decisions and handover in Altea.

Read the legal notice → See all published reviews →

Guillermo RivasYour contact in Altea

The next step

Let's turn the options into your project.

Attach your reference image and a photo of the actual room. I'll help you identify the adaptations worth considering before defining the design.

Scope and terms are confirmed before you place an order.

Request a proposal Ask a question

Practical answers

Questions about custom hinged-door wardrobes in Altea

Can a wide door be divided?＋

Narrower leaves can be compared where they improve opening, weight or proportion. The interior must remain accessible.

What do I need for an initial enquiry?＋

Send photographs, approximate dimensions and what you want the furniture to do. We will identify any details needed before a measured survey or quotation.

What is confirmed before manufacture?＋

The design, dimensions, materials, hardware, price and installation scope need to be agreed. Changes are reviewed before they are put into production.