Designed for the way you live

Sliding-door wardrobes in Altea

We can assist you inEspañolEnglishDeutschРусский

Sliding-door wardrobes in Altea. Overlapping leaves must not prevent drawer or accessory use. The accessible section is checked for each door position.

Plan my project → WhatsApp

The spaceA front-facing photo
DimensionsWidth, height, depth
StorageWhat it needs to hold

Designed for your space

The door saves floor space but changes access

Door width, overlap, tracks and internal divisions must align so drawers and pull-outs can open. The proposal continues to prioritise a composed appearance, practical storage and fitting details resolved before manufacture.

Designed for the space

Dimensions and layout are checked against the room and your priorities.

Choices explained

We compare suitable materials and hardware before the specification is approved.

Scope in writing

The quotation identifies the furniture, fitting and any optional or separate work.

One project contact

Your contact coordinates questions about the proposal and the next steps.

Guillermo RivasYour contact in Altea

Your project starts here

Bring your inspiration into your own space.

I'm Guillermo Rivas. An inspiration image is a useful start, but your room has its own proportions. Share it with me and we'll explore which ideas could fit and which need adapting.

No obligation. Rough measurements are enough to get started.

Share my idea Chat on WhatsApp

Interior decisions

Door movement organises the entire wardrobe

A continuous elevation can look very calm, provided it does not hide the module you need. We design the doors and interior as one mechanism. In Altea, it is tested against stepped access, irregular masonry, strong light and routes that may limit module size.

Calculated overlap

We detail door width, number of leaves and overlap between profiles as part of the drawing rather than at the end. The practical consequence: each useful opening aligns with the module it needs to serve.

Accessible drawers

Geometry sets the limit. Within it, we position drawers, baskets and pull-outs away from profiles and overlapped zones. The answer must meet one condition: accessories open fully with a door in its intended position.

Stable tracks

With the recess verified, we size profiles, rollers and support according to height, weight and finish. Approval depends on one clear result: the doors move without vibration or unnecessary effort.

Maintainable hardware

From the first proposal, we leave access for cleaning, adjustment and component replacement. The expected outcome: the mechanism is not trapped behind irreversible finishing pieces.

From problem to drawing

Three sliding elevations with different access patterns

Door count is not chosen for appearance alone. It changes how much interior is visible and which items can pull out. The scenarios are adjusted for old-town houses, apartments, villas and hillside properties.

Custom sliding-door wardrobes for two doors in Altea

Scenario 01 · Casco Antiguo

A narrow bedroom with a simple opening

From the first proposal, we divide the wardrobe interior and elevation into two compatible zones. The expected outcome: one door clears the everyday module completely. The proposal must continue to prioritise a composed appearance, practical storage and fitting details resolved before manufacture.

Starting point: We measure the distance to the bed, handles, curtains and entrance route once dimensions have been checked. The direct consequence: the sliding system saves space where it is genuinely needed. In Altea, this decision is also checked against stepped access, irregular masonry, strong light and routes that may limit module size.
Decision: No division remains trapped behind the central overlap. That is why we align rails and shelves with the opening left by each door.
Before manufacture: The decision starts with day-to-day use: we assess floor level, panel height and the route for bringing it in. The intended result is this: the door can be installed and adjusted without distortion.

Custom sliding-door wardrobes for three doors in Altea

Scenario 02 · Altea la Vella

More modules with a central composition

Geometry sets the limit. Within it, we coordinate three opening positions with drawers and internal equipment. The answer must meet one condition: the elevation rhythm does not sacrifice useful access. The actual property conditions in Altea take priority over a catalogue solution.

Starting point: We identify the most frequently opened module and which contents need pull-out access as part of the drawing rather than at the end. The practical consequence: the main zone receives the easiest opening.
Decision: The drawing records how we reserve the centre for a module compatible with the selected overlap. A later review leaves one clear criterion: drawers and baskets do not clash with profiles. The proposal must continue to prioritise a composed appearance, practical storage and fitting details resolved before manufacture.
Before manufacture: The proposal becomes more coherent when we draw all three doors in their limit positions. The requirement remains unchanged: each use is tested with the elevation in motion.

Custom sliding-door wardrobes for tall panel in Altea

Scenario 03 · Mascarat

Floor-to-ceiling doors without losing stability

The proposal becomes more coherent when we balance weight, stiffness and visual division before choosing one continuous panel. The requirement remains unchanged: the desired height remains manageable and adjustable. For a property around Altea la Vella, access and handling are reviewed before component sizes are fixed.

Starting point: The solution is tested in two stages. First, we survey actual height, floor level and upper fitting allowance. Then, the door does not depend on an ideal dimension.
Decision: We select a structure, profile and finish compatible with the size. One condition still applies: weight and deflection remain within a reliable solution.
Before manufacture: We confirm the lift, stairs, corridor and turn into the bedroom as part of the drawing rather than at the end. The practical consequence: the intended format can reach its final position. The approach is adapted to old-town houses, apartments, villas and hillside properties, without turning location into a preset style.

Configuration gallery

Examples of sliding-door wardrobes

Sixteen configurations showing different layouts, finishes and ways to integrate the furniture into a real room.

Sliding-door wardrobes in Altea: oak and woven-cane custom sliding wardrobe — 01
**Oak and woven-cane custom sliding wardrobe**Three breathable panels bring natural texture to a bedroom overlooking the centre of Altea

Sliding-door wardrobes in Altea: sage-green custom sliding-door wardrobe — 02
**Sage-green custom sliding-door wardrobe**Lacquered fronts and an oak interior organise clothing and drawers without crowding the desk area

Sliding-door wardrobes in Altea: smoked-glass sliding wardrobe — 03
**Smoked-glass sliding wardrobe**Black profiles, warm lighting and transparent panels create a lighter solution for a Mediterranean bedroom

Sliding-door wardrobes in Altea: dark-walnut custom sliding wardrobe — 04
**Dark-walnut custom sliding wardrobe**Continuous-grain panels cover the full wall while preserving the route towards the bathroom

Sliding-door wardrobes in Altea: white sliding wardrobe with oak interior — 05
**White sliding wardrobe with oak interior**An open panel reveals hanging space, drawers and shelves within a compact floor-to-ceiling installation

Sliding-door wardrobes in Altea: mirrored sliding wardrobe for a coastal bedroom — 06
**Mirrored sliding wardrobe for a coastal bedroom**The panels reflect sea light and visually widen a room with limited clearance around the bed

Sliding-door wardrobes in Altea: natural-oak custom sliding wardrobe — 07
**Natural-oak custom sliding wardrobe**Three warm panels and an illuminated interior complete a calm full-wall storage scheme

Sliding-door wardrobes in Altea: sliding wardrobe fitted around a column — 08
**Sliding wardrobe fitted around a column**A fixed side filler absorbs the projection so the doors can travel along one continuous level track

Sliding-door wardrobes in Altea: shallow custom sliding wardrobe — 09
**Shallow custom sliding wardrobe**Beige fronts, shoe storage and drawers use the corridor between bedroom and bathroom without blocking it

Sliding-door wardrobes in Altea: premium bronze-glass sliding wardrobe — 10
**Premium bronze-glass sliding wardrobe**Smoked glass, walnut and integrated lighting organise clothes, shoes and accessories in a master suite

Sliding-door wardrobes in Altea: sliding wardrobe beside the bed — 11
**Sliding wardrobe beside the bed**Handle-free taupe panels keep the storage accessible even where the side passage is particularly narrow

Sliding-door wardrobes in Altea: custom sliding hall wardrobe — 12
**Custom sliding hall wardrobe**Coats, bags, shoes and household items share one organised interior behind three cream fronts

Sliding-door wardrobes in Altea: clay-lacquered sliding wardrobe — 13
**Clay-lacquered sliding wardrobe**Smooth panels read as one continuous wall while concealing a carefully planned birch interior

Sliding-door wardrobes in Altea: walnut and glass sliding wardrobe for a suite — 14
**Walnut and glass sliding wardrobe for a suite**Natural veneer and bronze glazing balance display, drawers and warm lighting at sunset

Sliding-door wardrobes in Altea: adaptable custom sliding wardrobe for a teenager — 15
**Adaptable custom sliding wardrobe for a teenager**Double rails, shelves, drawers and sports storage can be adjusted as daily needs change

Sliding-door wardrobes in Altea: wardrobe concealed behind fluted sliding panels — 16
**Wardrobe concealed behind fluted sliding panels**One oak panel opens onto the fitted interior while the closed elevation reads as architectural wall cladding

Instagram

A closer look at our studio

Door count, usable opening and the checks that matter

More doors reduce individual panel size but add profiles and overlap positions. The best option depends on the interior. The actual property in Altea completes the choice.

Configuration	Usually solves	Critical check
Full height	Planning scenario: Continuous elevation to the ceiling	Verified during the survey: Transport, stiffness and top allowance
Two wide doors	Most frequent use: Short wardrobe or two internal zones	Worth checking: Door weight and central overlap
Three doors	Usually considered for: Medium elevation with central module	The proposal must resolve: Drawer access in every position
Four doors	Starting point: Long wall or shared use	Do not close the design without reviewing: More joints and module alignment
Integrated mirror	Frequent application: Bedroom needing reflection and openness	The site survey tests: Weight, safety and cleaning
Mixed panel	Typical context: Combination of lacquer, veneer or textile	Advance check: Joints, thickness and stability

Written scope

What the sliding wardrobe project includes

The project connects the elevation, interior and mechanism. The track is not selected after the carcasses are made.

Elevation survey

We document width, height, floor level, ceiling, sides and route in before the drawing is closed. Once that decision is made, the door format can be made and reach the room itself.

Opening map

We draw each door closed and in its working positions once dimensions have been checked. The direct consequence: the modules visible in each movement are known. In Altea, this decision is also checked against stepped access, irregular masonry, strong light and routes that may limit module size.

Coordinated interior

A nominal dimension is not enough here. We align divisions, drawers and accessories with usable openings. After the review, no pull-out is blocked by a profile.

Track system

The proposal becomes more coherent when we specify rollers, profiles, stops, supports and adjustment. The requirement remains unchanged: the mechanism matches door size and weight.

Panel and finish

We begin with one practical check: we establish substrate, thickness, mirror, lacquer, veneer or combination. It produces a specific result: the finish retains flatness and safety.

Fitting and testing

Sequence matters. First, we install, level, adjust, clean the tracks and test every opening. The second condition: handover checks movement and interior together.

Wall reinforcement, floor correction, electrical work or removal of the previous elevation are listed separately when required. Any additional work identified in Altea is added only after it has been explained and priced.

From drawing to fitting

Usable opening is approved before tracks are ordered

The budget depends on door count and size, mechanism, finish, interior and the difficulty of bringing panels to the surrounding area. In Altea, we also confirm stepped access, irregular masonry, strong light and routes that may limit module size.

Four milestones before handover

01
Useful enquiry
We review photographs, rough dimensions and what the wardrobe project needs to achieve, then explain what information is missing.
02
Technical survey
The surrounding area, opening, access and door movement are checked before the arrangement and elevation are approved.
03
Closed decisions
Drawings, finishes, hardware, project content and project estimate are accepted before fabrication is booked.
04
Adjusted installation
Delivery, protection, installation, adjustment and final review are coordinated in Altea. In Altea, this decision is also checked against stepped access, irregular masonry, strong light and routes that may limit module size.

What changes the quotation

Number of doors

The solution is tested in two stages. First, we evaluate together wider panels with three- or four-door compositions. Then, weight, joints and access are assessed together.

Mechanism and profiles

Instead of assuming a standard answer, we size tracks, rollers, stops and profiles for each door. The intended result can be stated plainly: the detailed quotation identifies the system supporting the use.

Panels and finishes

With the recess verified, we evaluate board, lacquer, veneer, mirror, glass and mixed materials. Approval depends on one clear result: weight, preparation and handling are included.

Interior and fitting

We include carcasses, accessories, levelling, access, fitting and adjustment. The decision is recorded. The final reference: the door is not priced apart from the wardrobe it must serve. The proposal must continue to prioritise a composed appearance, practical storage and fitting details resolved before manufacture.

Before the workshop · Altea

Conditions worth recording in Altea

Projects may involve old-town houses, apartments, villas and hillside properties. We do not assign one solution to an area: the construction, use and fitting route of each property are checked.

Casco Antiguo and Altea la Vella: reading the property

For custom sliding-door wardrobes, broad photographs and one rough dimension usually reveal what needs checking during the survey. The brief remains tied to the actual room.

Access and component sizes around Mascarat

Stepped access, irregular masonry, strong light and routes that may limit module size can change panel sizes, the delivery order and fitting time. We record those facts before manufacture.

Everyday use from Sierra de Altea to Cap Negret

The recommendation continues to prioritise a composed appearance, practical storage and fitting details resolved before manufacture. Materials and accessories are compared by care and usefulness, not by a presumed local style.

Details you can verify

What you can verify before approving the order

We publish how to contact us and when the team is available. Project-specific conditions in Altea are recorded prior to production.

Written guarantee

The accepted documents state what the guarantee covers, how long it applies, which parts are included and any care requirements or exclusions.

Languages

We work in Spanish, English, German and Russian, by WhatsApp, e-mail or at the Altea office by appointment.

Who coordinates the order

Your enquiry goes directly to the project team. A project manager gathers the information, explains open decisions and coordinates the order through to fitting.

Identity and contact

The enquiry is associated with mueblesamedidaaltea.es and proyectos@mueblesmedidavalencia.es. Controller details and terms of use appear in the legal notice.

Team availability

Published availability: Monday to Friday 09:00–13:00 and 14:00–20:00; Saturday 10:00–13:30 and 16:00–19:30.

Read the legal notice → See all published reviews →

Guillermo RivasYour contact in Altea

The next step

Let's turn the options into your project.

Attach your reference image and a photo of the actual room. I'll help you identify the adaptations worth considering before defining the design.

Scope and terms are confirmed before you place an order.

Request a proposal Ask a question

Questions before the survey

Questions about custom sliding-door wardrobes in Altea

Can sliding doors reveal the whole interior?＋

Usually part remains covered by another leaf. The interior is planned so pull-out elements can be used.

What do I need for an initial enquiry?＋

Send photographs, approximate dimensions and what you want the furniture to do. We will identify any details needed before a measured survey or quotation.

What is confirmed before manufacture?＋

The design, dimensions, materials, hardware, price and installation scope need to be agreed. Changes are reviewed before they are put into production.