- Styles and materials that don't quite fit between rooms.
- Wasted gaps due to commissioning each piece in isolation.
- Several suppliers, budgets and managers to coordinate.
- Deliveries and fitting on unrelated schedules.
- A global budget that is difficult to compare and control.
A project for the entire home
A coordinated furniture project for the entire home
The aim is not to repeat one finish everywhere. It is to make each room useful while the colours, proportions and details still belong to the same home.
Measured survey · bespoke design · Manufacturing · Transport and fitting
01Project adapted to your home
02A single point of contact
03Made-to-measure furniture
04Professional installation
05Altea and surroundings
A common vision
What does a whole-home furnishing project include?
A whole-home furnishing project allows you to design and equip several rooms of a home in a coordinated manner. Instead of hiring the kitchen, wardrobes, living room and bedrooms separately, All the furniture is considered within one coordinated proposal, with compatible materials, finishes, proportions and phases.
At Altea we offer this service for new-build flats, renovated homes, apartments, chalets and second homes. The scope can bring together measurement, layout analysis, furniture design, choice of materials, manufacturing, delivery and fitting. each item is confirmed in writing before starting, so you know what stays are included and what decisions are pending.
Learn how we work →Less coordination, more clarity
Your entire home coordinated by a single team
The value is not in filling the house with furniture, but in making overall decisions before manufacturing each piece.
- A visual and functional line for the entire home.
- Coordinated materials, colours and opening systems.
- One point of contact and a common scope for stays.
- Manufacturing and installation organised within a schedule.
- itemised quotation to decide priorities sensibly.
How is it different from other services?
The made-to-measure furniture service in Altea can cover one piece or a single room. Whole-home furnishing brings several rooms, or the entire property, into one coordinated brief. It is not equivalent to a comprehensive renovation with masonry and installations, nor does it replace a complete decorative interior design project: it focuses on planning, manufacturing and installing the furniture included in the proposal.
Homes, not commercial premises
We furnish complete homes of different types
The distribution, the intended use and the phase in which the property is located change the way the project is organised.
New construction apartments
Furniture for an empty home: kitchen, wardrobes, living room, bedrooms and auxiliary areas within a common approach.
Renovated homes
Design adapted to the new distribution, the coverings, the existing services and the language of the renovation.
Chalets and single-family homes
Coordinated solutions for large rooms, work areas, dressing rooms and spaces with special geometries or heights.
Apartments and second homes
A functional and easy-to-maintain proposal, adapted to the habitual, seasonal or holiday use of the home.
Homes for rent
Priority for storage, resistance, simple maintenance and the investment available in each room.
Is it a store, office, restaurant or other business? see the dedicated page for custom commercial furniture.
Scope adapts
Which rooms can we include in the project?
You can bring together the entire home or select priority rooms. Each block is designed separately, but is decided as part of the same set.
Kitchen
Columns, pantries, islands, wall units and storage solutions adapted to installations and appliances.
made-to-measure kitchens →Living room and dining room
TV cabinets, bookcases, shelves, sideboards, display cabinets, benches and compositions integrated into architecture.
Living room furniture →Wardrobes and dressing rooms
Built-in wardrobes, sliding or folding fronts, dressing rooms and interiors configured according to what you need to store.
WardrobesDressing rooms →Bedrooms
Headboards, side tables, desks, wardrobes, folding beds and coordinated children's or youth furniture.
Custom bedrooms →Bathrooms and laundry
Furniture under sink, columns, auxiliaries and modules prepared to integrate washing machine, dryer and storage.
Bathroom furniture →Halls and hallways
Shoe racks, benches, panelling and shallow wardrobes to organize access and passage areas.
See halls →Office and home office
Desks, shelves, filing cabinets and technical backgrounds planned for comfortable day-to-day work at home.
Custom home office →Special spaces
Furniture under stairs, attics, pillars, setbacks and openings with measurements that do not allow a standard solution.
Solve a difficult gap →
Do you already know which rooms you want to furnish?
Tell us the priorities and we will prepare an initial guidance with a quotation by room.
No ambiguous items
What does our whole-home furnishing service include?
The final proposal confirms the exact scope. This way you can distinguish the furniture work, the possible accessories and the items that require another professional.
- Initial consultation and definition of priorities.
- Visit, access review and measurement.
- Analysis of distribution by room.
- Furniture design and selection of materials.
- Visual proposal suited to the agreed scope.
- Detailed quotation by room and items.
- Manufacture according to approved design.
- delivery, fitting, adjustments and final review.
Lighting integrated into furniture, mirrors, glass, countertops and other accessories can be priced when they are part of the design. Appliances, textiles, decoration or removal of previous furniture are only considered included if they expressly appear in the proposal.
Plumbing, electricity, masonry, painting, flooring and a comprehensive renovation of the home are not included in the service. If the project requires coordination with these works, it is identified before manufacturing and it is left in writing who is responsible for each item.
Three scales, one methodology
Choose the level of furnishing your home needs
They are not closed rates. They are ways of ordering the project according to the number of rooms, the degree of personalisation and investment priorities.
Essential furniture
To concentrate the investment in the kitchen, wardrobes, living room and master bedroom, maintaining a compatible visual line between the pieces.
- priority rooms
- Essential storage
- Coordinated finishes
Complete home furnishing
For the main and supporting rooms to be developed as one project, with manufacture and fitting planned together.
- Whole-home scope
- quotation by room
- Coordinated fitting
bespoke Whole-home project
For homes with panelling, special furniture, mechanisms, complex openings or a level of detail that requires greater technical development.
- Non-standard solutions
- Special details and hardware
- Coordination with technical plans
From inquiry to delivery
This is how we develop a whole-home furnishing project
Each phase reduces uncertainty before the next. Measurements, design, materials and budget are validated before entering manufacturing.
- 01
First consultation
You tell us which home you want to furnish, the rooms, references, approximate budget and target date.
- 02
Visit and measurement
We review distribution, measurements, installations, access routes and characteristics that determine each piece of furniture.
- 03
Distribution proposal
We define what each room needs, how it is used and how it relates to the rest of the home.
- 04
Design and materials
We choose finishes, colours, hardware, openings, interior equipment and meeting details.
- 05
Detailed budget
We present the items by stay, materials, manufacturing, delivery and fitting for your approval.
- 06
Manufacturing
The parts are produced according to the measurements and specifications validated in the project.
- 07
Fitting and handover
We coordinate the installation of the rooms included, the adjustments and the final review of the set.
Documented projects
Whole-home project archive
Each project is published with photographs, approximate location, scope, materials and verifiable results.
Documentation in progress
The first comprehensive projects are being documented and will be published with data authorized by each client. We do not use invented examples to simulate experience: in the meantime, the best reference is how we work and what each proposal includes.
Complete housing gallery
Ideas to coordinate all rooms
Twelve references to visualize how the kitchen, wardrobes, living room, bedrooms, bathrooms and work areas can coexist within one coordinated proposal.
warm kitchenWooden fronts and mineral countertop
Functional kitchenCompact distribution and continuous storage
Integrated wardrobeCapacity without reloading the bedroom
Equipped dressing roomInteriors adapted to daily use
Coordinated living roomStorage, display and equipment
Mediterranean dining roomLight proportions and warm materials
Serene bedroomHeadboard, side tables and joint storage
Flexible roomFolding bed and free space during the day
Custom bathroomMaterials suitable for humidity and cleaning
Integrated laundryEquipment and storage organised in one front
Home officeWork, filing and wiring resolved neatly
Useful hallBench, support and storage in a shallow footprint
Consistency between rooms
Materials and finishes designed as a family
A Whole-home project does not require repeating exactly the same finish in each room. The key is to define a compatible palette: wood tones, lacquer colours, interiors, handles, profiles and hardware that can vary without losing continuity.
The selection also responds to use. A kitchen, a bathroom and a bedroom do not receive the same humidity, load or frequency of cleaning. That is why the support and finish are valued along with the location of the furniture.
- Technical melamines and laminates.
- Lacquered MDF and natural veneer.
- Wood, glass and mirrors when they fit into the design.
- Hardware, openings and accessories according to use.
Investment by real scope
How much does it cost to furnish a complete home in Altea?
There is No reliable figure without knowing the housing and scope. The budget depends on the number of rooms, measurements, amount of furniture, materials, fittings, equipment, manufacturing complexity, access and fitting.
To facilitate decisions, the review is organised by room and items. This way you can identify what is a priority, compare finishing alternatives and, if necessary, plan the project in phases without losing general coherence.
Price examples will only be published when they correspond to real and comparable projects. Until then, the useful reference is a prepared proposal for your home.
What you can expect: After the visit and measurement, you receive a quotation broken down by room and items, in writing and with no obligation, to compare alternatives and decide whether the project is executed completely or in phases.
Request an itemised quotationHousing and stays
Surface, distribution, number of rooms and number of elements.
Design and complexity
Special geometries, panelling, technical integration and level of detail.
Materials and hardware
Supports, finishes, mechanisms, accessories and confirmed lighting.
Logistics and fitting
Access, delivery, order of installation, adjustments and finishing.
Confirmed planning
How long does a whole-home furnishing project take?
The deadline depends on the number of rooms, materials, technical complexity, validations and installation conditions. The project goes through consultation, measurement, design, approval, manufacturing and fitting; each phase needs to close its decisions before moving forward.
After measuring and defining the scope, a plan is prepared with the expected milestones. We do not publish generic ranges because a home with four essential pieces and another with special furniture in all rooms do not require the same development.
If you need the home ready for a specific date - a move, handing over the keys or the start of a rental -, indicate this in the first consultation: the manufacturing and fitting order is organised based on that objective.
Specific advantages
Advantages of making all the furniture within the same project
Shared design language
A coherent palette of materials, colours, proportions and details between environments.
Better use of space
Storage needs are distributed between rooms, avoiding duplications and spaces without function.
Fewer interlocutors
Consultations on furniture, changes and fitting are centralized within the same scope.
Coordinated measurements
Steps, heights, openings and junctions are reviewed thinking about the entire home.
Controllable budget
The breakdown by room allows you to prioritise and compare alternatives before manufacturing.
Planned fitting
The order of delivery and installation is decided according to access, dependencies and condition of the home.
Does it fit what your home needs?
Ask for a no-obligation review: we review stays, priorities and budget before proposing anything.
A verifiable method
Why trust this approach to furnish your home?
The proposal is built around data that can be verified: measurements of the property, rooms included, approved decisions, chosen materials, budgeted items and fitting conditions.
- A common scope divided by room.
- Important decisions closed before manufacturing.
- Budget with identifiable items.
- Review of access and fitting from the beginning.
- The studio, workshop and guarantees documented on their own pages.
Reviews
Experiencias de proyectos a medida en Altea
A selection of experiences covering measuring, design, material choices, manufacture and fitting in Altea.
Local coverage
whole-home furnishing in Altea and surroundings
We propose projects in Altea capital and municipalities in the metropolitan area. Location, access and fitting conditions are reviewed before confirming the visit.
Before starting
Frequently asked questions about whole-home furnishing
These answers clarify the general scope. The specific conditions are confirmed in the proposal for each home.
What is the difference between whole-home furnishing and comprehensive renovation?＋
whole-home furnishing coordinates the furniture of several rooms. A comprehensive renovation can include demolition, masonry, electricity, plumbing, painting and flooring. These items are not assumed within the furniture unless expressly indicated.
Can only part of the home be furnished?＋
Yes. The project can concentrate on priority rooms and maintain a base of materials and criteria to expand the complex in another phase.
Does the service include 3D design?＋
The form of presentation is defined according to the scope. It may include visual or 3D documentation when it has been expressly contemplated in the proposal.
Do you work with new construction apartments?＋
Yes, the structure is designed for empty homes where it is necessary to coordinate kitchen, storage, living room, bedrooms and auxiliary spaces.
Can you work on the architect's plans?＋
The plans are used for initial planning. Before manufacturing, the necessary dimensions in the home are reviewed and the points that affect the furniture are coordinated.
Does all the furniture need to be custom made?＋
Not necessarily. The scope may combine custom parts with standard elements if the solution is functional, maintains consistency and is clearly identified.
Is the budget divided by rooms?＋
The recommended approach separates environments and items to understand cost, compare alternatives, and decide priorities before approving.
Are delivery and fitting included?＋
The proposal must expressly indicate manufacturing, delivery, fitting, adjustments and any special access conditions.
How long does the entire project take?＋
It depends on the rooms, materials, complexity and validations. After the survey and scope review, we provide a project-specific schedule.
Do you work outside of Altea capital?＋
The planned coverage includes Altea and different municipalities in the metropolitan area. The location is confirmed before arranging the visit.
Can we choose materials and hardware?＋
Yes. Options compatible with the use, appearance, maintenance and budget of the rooms included are compared.
Do you remove old furniture?＋
Removal of existing furniture is not included as standard. Where feasible, it can be assessed and listed separately in the quotation.
A project grounded in the property
The practical questions behind a project in Altea
No two addresses present the same combination of walls, light, access and daily routines. These are the conversations that make a whole-home furniture scheme specific to the property rather than a variation on a standard product.
Describe the problem before the product
Start with a plan, room photographs and a practical list of priorities by area. We are listening for which rooms come first, where materials should connect and where each space deserves a different answer. A polished specification can come later; at this stage, a candid description is usually more useful.
A short list of must-haves and nice-to-haves keeps the early conversation honest. It also gives the quotation somewhere sensible to flex.
Measure the decisions, not every surface
Approximate measurements help us judge scale. Production dimensions are different: they are taken at the points that control doors, fillers, worktops, services and the route into the room.
Ceiling drops, skirting, sockets and door swings are easy to miss in a plan. They are recorded where they affect the furniture and ignored where they do not.
The visible finish is only one layer
A convincing sample is one that still makes sense beside the floor, doors and light that will remain. We also confirm what supports it, how edges are finished and which hardware carries the load.
Strong daylight around Altea can make sheen and grain appear more pronounced. A sample is therefore judged at the angle and scale in which it will be seen.
Fitting begins on paper
Floor level, lift size, stairs, parking and tight turns are checked before module sizes are approved. Dividing a piece well is a design decision; discovering the need at delivery is not.
For houses, we may be planning several floor changes. For flats, the lift and corridor often set the practical limit. Neither should be left to the delivery team to discover.
Price becomes useful when the assumptions are visible
Phasing can be sensible, particularly when several rooms are involved. What matters is deciding the sequence before one early choice limits a later room.
If the first scope is too broad, we reduce it deliberately—by room, feature or phase—rather than weakening every component at once.
What happens after the first review
If essential information is missing, we name it specifically. Sometimes another photograph is enough. Sometimes the room must be measured or another trade needs to finish first.
Once the direction is agreed, we can discuss timing with more honesty. Lead time follows the approved scope, material availability and conditions at the property.
Room-by-room planning
How each room keeps its own functional brief
The same measured process runs through the property, yet the brief changes with cooking, dressing, working, washing and relaxing.
Kitchen and daily routines
Appliances, worktop, tall storage and waste sorting are considered as one routine. Where the kitchen opens onto the living area, the visible elevations also need a calmer rhythm.
In Altea, strong light can expose small colour differences across a long run of doors. Samples are checked together, not approved one at a time on a phone screen.
Wardrobes by person, not by metre
Bedroom wardrobes are planned alongside the bed, curtains, switches and the route through the room. Capacity matters, but so does being able to open everything comfortably.
Top storage is useful for infrequent items, provided the lower sections remain comfortable. We avoid gaining theoretical litres that no one can reach.
Living room storage without visual noise
A living-room scheme can combine a low media unit, closed cupboards and one carefully placed open area. The empty spaces are as important as the storage volume.
Shelves for real books are checked for span and load. Decorative thickness alone does not guarantee that a long shelf will remain straight.
Bedrooms that leave room to move
Headboards, bedside units, wardrobes and occasional desks are considered around the bed clearances first. A complete set is not useful if circulation becomes awkward.
We also consider curtains, shutters and cleaning access around the bed. Small clashes are far easier to remove on the drawing than in a furnished room.
Bathrooms and utility areas
A utility cupboard may combine laundry appliances, detergents, household tools and linen. Ventilation and safe access are planned before a full-height door is approved.
Removable panels or planned gaps keep valves and wastes reachable. The neatest detail is one that can still be serviced.
A home office that closes down properly
A workspace within a bedroom or living room should be able to recede at the end of the day. Cable routes and closing fronts help more than decorative desk accessories.
Power and data points are listed with the equipment rather than scattered wherever a panel happens to end.
One delivery plan for the property
Where the home remains occupied, fitting can be divided into practical stages. The sequence protects usable rooms and keeps parts from being stored in the way.
The installation plan names which rooms must be clear and which surfaces need to be finished. This prevents avoidable return visits.
Phasing and investment priorities
Not every room has to be manufactured at once. We can establish a shared direction, then phase the work without making early rooms block later decisions.
Long-lead materials and appliances are identified early so they do not quietly control the entire installation date.
First review
Tell us how you want to furnish your home
Send us the plans, some photographs or approximate measurements. We will review the rooms you want to include and prepare an initial project review.
- 01Indicates the type of property and the location.
- 02Select priority rooms.
- 03Attach plans or photos if you have them.